Laser Cut Clear MIRRORED Acrylic Discs

    Laser Cut Clear MIRRORED Acrylic Discs

    Code: Laser_Cut_Clear_Mirrored_Acrylic_Discs
    Choose a Thickness:
    Disk Size:
    Price: $0.00
    Qty:

    Our acrylic disks are custom made from our cast acrylic sheet. We laser cut the sheets into the disk shape with our state of the art precision laser. The laser creates polished edges and perfect cuts. Our disks are available in any color of acrylic sheet we offer and up to 1/4" in thickness.
    Order more than one set and get quantity discounts
    • 2 Sets 5% discount
    • 4 Sets 7% discount
    • 6 Sets 10% discount
    • 8 Sets 12% discount
    • 10 Sets 15% discount
    We make our living working with acrylic and plexiglass sheet. Acrylic (Plexiglass) is a relatively soft material and it scratches easily if it is not taken care of. It also naturally builds up a static charge and it attracts dirt and dust like a magnet. We offer two of the best plastic cleaners and polishes on the market today, Novus and Brillianize.

    Both of these fantastic products clean all plastics without scratching and they both leave a lustrous shine that resist fogging, repels dust and eliminates the static charge.

    Resists finger marking
    Contains no abrasives or harsh chemicals
    Leaves a smooth, clean, greaseless shine
    Use our Novus #1 for new or undamaged acrylic/plexiglass sheet

    Novus #1 gently cleans all plastics without scratching. Leaves a lustrous shine that resists fogging, repels dust, and eliminates static.

    To clean New or Undamaged Acrylic Plexiglass Sheet:

      If the surface is extremely dirty, apply NOVUS No. 1 liberally and wipe using long, sweeping strokes. Do not use pressure at this time or large dirt particles may scratch the plastic.
    • Re-apply NOVUS No. 1. Polish using short, circular strokes with a clean portion of the cloth.
    • When the surface is thoroughly clean and uniformly covered, buff to a slippery glaze with a clean portion of the cloth. Surfaces buffed to a high glaze are more resistant to dust and future scratching.
    • Reapply NOVUS No. 1 regularly to maintain the antistatic, smudge and scratch resistant properties.

    To Clean Acrylic Plexiglass Sheet with Light Scratches:

    Our Novus Fine Scratch Remover removes fine scratches, haziness and abrasions from most plastics. With repeated use, NOVUS No. 2 restores faded and discolored plastics.
    Removes the damage instead of filling it in.
    Buffs out quickly

    After restoring, seal with a coat of polish
    • Observe condition of the surface to be treated. The deeper the scratches, the greater the pressure required to remove them.
    • If the surface is dirty, clean with NOVUS No.1 before applying NOVUS No. 2.
    • Shake well. Test in an inconspicuous area.
    • Apply NOVUS No. 2 liberally. Using a clean, soft cloth, polish with a firm back-and-forth motion at right angles to the scratches. Keep the cloth saturated with polish at all times.
    • When the worst scratches have been polished out, reapply NOVUS No.2 uniformly in a circular motion to the entire surface using short, circular strokes and light pressure. Allow to dry to a light haze.
    • Using a clean portion of the cloth, buff the surface to a slippery glaze using firm, short strokes. This procedure is imperative in achieving the best results.
    • For heavy scratches, multiple applications of NOVUS No. 2 or application of NOVUS No. 3 may be required.
    • Follow with NOVUS No. 1 for best results.

    To Clean Acrylic Plexiglass Sheet with Heavy Scratches and Abrasion:

    Requires use of NOVUS No. 2 for final finishing

    Our product is Not recommended for use on coated plastics
    • Shake well. Test in an inconspicuous area.
    • Apply NOVUS No. 3 liberally. Using a clean, soft cloth, polish with a firm back-and-forth motion at right angles to the scratches. Keep the cloth saturated with polish at all times.
    • Continue polishing until only fine scratches remain. Using cloth, remove all remaining polish, this is very important!
    • Using a clean cloth, apply NOVUS No. 2 in a circular motion uniformly to entire surface. Polish using light pressure until NOVUS No. 2 dries to a light haze.
    Using a clean portion of the cloth, buff the surface clean. Follow with NOVUS No. 1 for best results.
    In Stock