Arbor Adapter

    Arbor Adapter

    Code: Arbor_Adapter

    Shipping Weight: 1.00 pounds

    Price: $7.50
    Qty:

    It is easy to buff the edge of an acrylic sheet into a crystal clear edge, just as clear as the surface of the sheet.

    First you need to prepare the edge by sanding all of the saw marks from the surface of the edge.

    This can be done with a 100 grit paper, a lower grit paper is needed if the edge is really rough. After using a 100 grit paper move to a 300 grit then to a 400 to 600 grit.

    Wet/dry sand paper works best, use a small amount of water when sanding.
    Make sure that all of the saw marks are removed from the edge and the edge is smooth and clean.

    Next, use a buffing wheel on the edge. We offer buffing wheels in 5" to 10" diameters, 50 ply wheels.

    Our 50 ply are approx. 1-1/2" wide, this makes the polishing job easier and faster.

    If you have a little buffing to do, use our 5" wheel, if you have a lot of buffing, use a 8" or 10" 50 ply wheel.
    In Stock
    If you are buffing the edges of a project you can use our buffing wheels with an electric drill with our arbor adaptor. Turn the wheel at full speed, with the wheel moving back and forth against the edge of the acrylic sheet. The arbor adapter allow use any of our buffing wheels with any electric drill.