Delvie's Plastics Inc.
133 West Haven Ave
Salt Lake City, UT  84115
(800) 533-5843  Fax (801) 467-1540

Contact us:  sales@delviesplastics.com                               Home Page

Plastic Welding - Low Cost Solutions for Do-It-Yourselfers

Plastic Welding is fun and easy.  Welding plastics (Polyethylene, Polyproplyene, PVC, ABS) requires that you melt the plastics together.  A flame is too hot and only burns the plastics.  Our Seeley welding units have a heating element in the handle that heats the air to approx. 550 F which melts that plastics together without burning the materials.  The weld in the plastic is often stronger than the original plastic itself.  It is easy to repair a fender or gas tank on an ATV.  Remember that you must use a welding rod that is the same type of material that you are welding.

See our complete instruction on How to Weld
 

SI-1005 SEELYE ELECTRIC PLASTIC WELDER UNIT
 

Our basic Seelye Welder contains everything necessary for fast economical welding of plastics. Weld polyethylene, polyproplyene, PVC, and ABS. It has been said that by the year 2008 50% of the components, bumpers, hoods, gas tanks, etc. well be constructed from plastics which can only be repaired by welding. If you do any repairs on ATV's, automobiles, RV's, you need our welder.  Includes one round tip (shown below), air regulator, pressure gauge, steel stand, 500 watt element and complete instructions for operating.  The list price on this unit is $288.00, our online price is $240.00  We also carry various attachments and welding rod.  Ships same day as ordered.

List Price $288.00
Online Price $240.00

 

ATTACHMENTS - Welding Tips

#5 Round Tip - 

This tip takes any size welding rod.  With the welder in one hand and the welding rod in the other, use a fanning motion on the underneath side of the welding rod and the top of the base plastic.  Remember to keep continuous pressure on the welding rod.  (This tip is included in our SI-1005 Welder)

List Price $20.85
Online Price $18.50

#4 Tacking Tip - 

No welding rod is required with this tip.  This tip is used to tack a seam together.  This is strictly a pre-welding tip.  Drag the tip along a seam to hold in place until a permanent weld is completed.

List Price $29.50
Online Price $26.00

#9 1/8" High Speed Welding Tip for 1/8" & 5/32" Welding Rod

Round Automatic Speed Tip for 1/8” & 5/32” dia welding rod (Old Style).  This tip is an automatic speed tip, which allows the user to have a free hand.  The welding rod is inserted into the feeder tube and once the rod adheres to the base plastic the user can let go of the welding rod.   It enables you to weld at speeds 4 to 6 times faster.  It feeds the rod in the right direction to form uniform welds.  Stainless steel construction.

List Price $87.99
Online Price $79.00

HEATING ELEMENTS
Our elements work on all of our Seeley Welders. It is a good idea to keep a spare element just in case your present element burns out and you are in the middle of a job or class project. Our welders come with the 500 Watt installed.  We recommend a 500 Watt element for all type of welding, it is hot enough for fast welding but not too hot to burn the welding rod.

400 Watt - Temp 350 to 550F
500 Watt - Temp 460 - 770F
650 Watt - Temp 570 to 900F
220 Volt Elements available on special order.

List Price $26.20
Online Price $24.00

Questions or comments please contact us at sales@delviesplastics.com