Surface Curing Agent - 2 Oz. Bottle Surface Curing Agent

    Surface Curing Agent - 2 Oz. Bottle Surface Curing Agent

    Code: Surface_Curing_Agent

    Shipping Weight: 1.00 pounds

    Price: $6.00
    Qty:

    Polyester resins will not fully cure when they are exposed to the air.

    When you are casting resin in a mold, all of the resin that is against the mold will cure, but the surface of the resin that is exposed to the air will not fully cure. It will stay sticky and somewhat soft. (Think of it like baking a cake, if you flip a cake pan over and turn the cake upside down, the top of the cake, the part that was against the pan is fully cured, but the bottom of the cake, which was the top and exposed to the air, will not fully cure.) Our surface curing agent resolves this problem. It allows a thin layer of wax to form on the top of the resin and allows the resin to fully cure to a hard tack free surface. This product slightly clouds the resin so don't use it when you are doing a crystal clear casting.