Aristrocrat/Polytex Liquid Glass
Aristrocrat Liquid Glass is a crystal clear polymer coating that preserves and beautifies precious photos, wall plaques, decorative trays, table surfaces, burl clocks, bar tops, figurines, etc. The sparkling, glossy, clear film enriches color, enhances wood grains and lasts for years. The two-part 1 to 1 liquid mixture is easy to apply and cures with the look of liquid glass. Heat and alcohol resistant. Waterproof! No polishing required.
Beautiful, professional results are easy.
It is ideal for embedding mementos such as coins, photos or other memorabilia.
Please read the instruction sheet before purchasing
MSDS (Material Safety Data Sheet) Polymer Resin
MSDS (Material Safety Data Sheet) Polymer Hardner
Approximate Coverage Area
8 OZ. KIT (4 oz Resin/4 oz. Hardner) 2 square feet
PINT KIT (8 oz Resin/8 oz. Hardner) 4 square feet
QUART KIT(16 oz Resin/16 oz. Hardner) 8 square feet
GALLON KIT(64 oz Resin/64 oz. Hardner)32 square feet
For indoor use only
|8 Oz. Kit Polymer Coating
|16 Oz. Kit Polymer Coating
|32 Oz. Kit Polymer Coating
|Gallon Kit Polymer Coating
|2 Gallon Kit Polymer Coating
Multi-Purpose Sealer, Glue & Quick Decoupage
Quick, Safe, economical. Use on wood, prints, photo's, styrofoam, newspaper, plastics, fabrics, silk flowers, puzzles, etc. Dries clear.
As a glue: Brush a thin coat of Ultra-Seal on back of prints and position on plaques. Using a brayer or round bottle, press and roll out air bubbles starting from the center of your work. With a damp cloth, wipe any excess Ultra-Seal from edges, etc. Allow to dry.
As a sealer: Brush a thin coat of Ultra-Seal in one direction on prints, plaques, photo's, or fabric. Allow to dry. Then brush a second coat in the opposite direction and allow to dry.
As a quick decoupage: Brush on 6-8 coats of Ultra-Seal alternating directions and allowing each coat to dry thoroughly.
Ultra-Seal is availably in 4 oz., 16 oz. Jars
|4 Oz. Jar Ultra Seal
|16 Oz. Jar Ultra Seal